Tripp Lite SMART3000RM2UN UPS System with Pre-installed WEBCARDLX SMART3000RM2UN

No reviews yet Write a Review
CAD $2,401.99
Calculated at Checkout


Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card.

The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available for free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

  • NEMA L5-30P input, 8 NEMA 5-15/20R & 1 L5-30R outlets
  • 2 independently switchable output load banks
  • Hot-swap batteries, 98% efficiency, Sine wave output
  • USB, RS232, EPO and Pre-installed WEBCARDLX interface
  • Interactive LCD provides UPS status information and advanced configuration options
  • 120V nominal output during brownouts to 83V and overvoltages to 145V
  • 3kVA / 3000VA / 2250W line interactive 2U rack/tower UPS

Extra Information

Tripp Lite
Receptacle Type:
NEMA L5-30R,NEMA 5-15/20R
Receptacle Detail:
1 x NEMA L5-30R,8 x NEMA 5-15/20R
Product Series:
Input Voltage:
120 V AC
Transfer Time:
5 ms
Typical Battery Recharge Time:
4.50 Hour
Limited Warranty:
3 Year
Form Factor:
Backup/Run Time (Full Load):
3.50 Minute
Manufacturer Website Address:
Package Contents:
SMART3000RM2UN UPS System with Pre-installed WEBCARDLX PowerAlert Software CD USB Cable Serial Cable EPO Cable 4 Post Installation Kit Instruction Manual
Plug/Connector Type:
Product Type:
Line-interactive UPS
Load Capacity:
3 kVA/2.25 kW
Tripp Lite by Eaton
Product Model:
Output Voltage:
120 V AC
Country of Origin:
Rack Height:
Hot Swappable:
Backup/Run Time (Half Load):
10 Minute
Software Included:
PowerAlert Software
Network Management:
SNMP Manageable
Serial Port: