Description
Protects Mission-Critical Rack-Mounted Equipment
- Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
- Audible alarm signals loss of utility power, overload, low battery and fault conditions
- 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
- 0.9 power factor rating
- 570-joule surge suppression rating
- Supports half load up to 14 min. and full load up to 4.9 min.
- Internal batteries designed for hot-swap field replacement
- 95% line-power efficiency rating saves money in energy costs
- Expandable runtime with optional external battery packs, such as Tripp Lite's BP36V15-2U
- Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH
- Optional EnviroSense2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
- Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
- 4 outlets are switchable to remotely reboot equipment or shed nonessential loads
- Maintains 120V nominal output over input range of 83V-145V without using battery power
- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
- Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
- Rotates for easy viewing in rack-mount or tower configurations
- USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download from www.tripplite.com/poweralert)
- EPO port supports emergency shutdown in large facilities
- Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
- Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
- Mounts in upright tower position with optional 2-9USTAND accessory
- 14 min. runtime at half load; 4.9 min. at full load
- Expandable runtime with optional external battery packs
- Pre-installed WEBCARDLX network interface
- 8 NEMA 5-15R outlets-4 switchable via network interface
- Corrects under- and overvoltages from 83V to 145V
Extra Information
Brand:
Tripp Lite
Receptacle Type:
NEMA 5-15R
Receptacle Detail:
8 x NEMA 5-15R
Environmental Certification:
RoHS
Environmentally Friendly:
Yes
Input Voltage:
120 V AC
Transfer Time:
4 ms
Typical Battery Recharge Time:
4.50 Hour
Limited Warranty:
3 Year
Form Factor:
Rack-mountable
Backup/Run Time (Full Load):
4.90 Minute
Manufacturer Website Address:
http://www.tripplite.com
Package Contents:
SmartPro SMART1500RMXLN 1.5kVA Rack-mountable UPSPowerAlert Software CDUSB CableSerial CableEPO Cable4 Post Installation KitOwner's ManualNetwork Interface Card
Plug/Connector Type:
NEMA 5-15P
Product Type:
Line-interactive UPS
Load Capacity:
1.50 kVA/1.35 kW
Manufacturer:
Tripp Lite by Eaton
Product Model:
SMART1500RMXLN
Output Voltage:
120 V AC
Country of Origin:
China
Rack Height:
2U
Product Line:
SmartPro
Hot Swappable:
Yes
Backup/Run Time (Half Load):
14 Minute
Software Included:
PowerAlert Software
Network Management:
SNMP Manageable
Serial Port:
Yes
USB:
Yes