show / hide sidebar

Categories

Ubiquiti Nanobeam NBE‑5AC‑Gen2

CAD $119.99
SKU:
NBE-5AC-GEN2
Shipping:
Calculated at checkout
Current Stock:
Out of stock
Out of Stock

Product Description

Ubiquiti Nanobeam NBE‑5AC‑Gen2 (NBE-5AC-GEN2)

 

High-Performance airMAX® ac Bridge

Incorporating innovative industrial design with proprietary airMAX® ac technology, the NanoBeam®AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint.

TECH SPECS

Header

  • Ubiquiti
  • Ubiquiti
  • Ubiquiti NanoBeam AC GEN2
  • NBE-5AC-GEN2
  • 1

Antenna

  • Internal
  • 19 DBi
  • Directional

Chassis

  • Outdoor

Processor

  • MIPS 74KC
  • 1
  • 1
  • Atheros
  • 720 megahertz

RAM

  • DDR2 SDRAM
  • 128 megabyte, 128 megabyte

Flash Memory

  • 8 megabyte, 8 megabyte

Networking

  • Wireless bridge
  • External
  • Wireless
  • AirMax ac
  • AirMax ac
  • DHCP
  • 5 GHZ
  • PoE
  • WLAN, LAN, Power
  • Pole mountable, Wall mountable, Manageable, Management Wi-Fi radio, 24KV ESD Protector

Interface Provided

  • 1 x 1000Base-T (PoE) - RJ-45

OS Provided

  • AirOS

Power Device

  • Power injector
  • 8.5 watt

Miscellaneous

  • Pole mount
  • IEC 60068-2-6, ETSI 300 019, IEC 60068-2-14, IEC 60068-2-11, MIL-STD 810G 509.5, MIL-STD 810G 506.5, FCC, RoHS, IC

Dimensions & Weight

  • 18.9 centimetre
  • 12.5 centimetre
  • 18.9 centimetre
  • 530 gram

Service & Support

  • 1-year warranty

Service & Support Details

  • Limited warranty - 1 year

Environmental Parameters

  • -40 degree Celsius
  • 80 degree Celsius
  • 5 - 95% (non-condensing)

Model Comparison

 
 
 
 
Frequency 5 GHz 5 GHz 2.4 GHz 5 Ghz
Throughput 150+ Mbps 150+ Mbps 330+ Mbps 450+ Mbps
Range 10+ km 15+ km 15+ km 15+ km
Improved Wide Bandwidth Antenna      
Management Radio    

Product Reviews

Write Review

  1. Great Value and Reliability

    Posted by Shawn on Oct 30th 2020

    We used this solution to send video and camera control signals about a kilometer through a very heavy RF traffic zone and over water. The system was very easy to configure and because we tested our setup and configuration before installing it, aiming was easy. The mount is very sturdy and has stood up to 100km+ winds. No fancy tools to aim it we just "eyeballed" it and had great reception.
    I would highly recommend this product for any areas where a hard link is not practical or possible.

  2. Ubiquiti Nanobeam NBE‑5AC‑Gen2

    Posted by Unknown on Jul 6th 2019

    I installed 6 of these units and they perform as advertised, I would not hesitate to recommend the Ubiquiti Nanobeam NBE‑5AC‑Gen2 anytime

  3. Solid improvement over previous hardware generation

    Posted by Brian on Mar 28th 2019

    One of the nicest pieces on the new hardware version of this product is the two network ports - the earlier revision only had one. This increases the options you have with regards to incorporating it into your network design. The second port even has PoE passthrough which allows you to power another 24V passive PoE device (very handy in a multi-hop configuration to provide both power and network connectivity to the second device). I've got a few of these set up, with one of them being a 4.5km point to point link that has a throughput of 400Mbps on an 80Mhz channel width.

Find Similar Products by Category