Ubiquiti UniFi Building-to-Building Bridge (UBB)
1.7+ Gbps bi-directional Plug and Play 60 GHz Bridge with 5 GHz Radio Redundancy, UniFi Controller Management, and range of up to 500 m
UniFi® Building-to-Building Bridge is the ideal solution for short-range, high-throughput connectivity. Integration with the UniFi Controller makes bridging two networks seamless. As a pack of two radios, UniFi Building-to-Building Bridge contains everything you need to get up and running within minutes. Enjoy simple, easy-to-use gigabit connectivity anywhere.
- UniFi Building-to-Building Bridge (x2)
- Ball joint mount (x2)
- Lock ring (x2)
- Metal strap (x2)
- Gigabit PoE (48V, 0.32A) with mounting bracket (x2)
- Power cord (x2)
Overview The UniFi Building-to-Building Bridge, model UBB, is the ideal solution for high-throughput connectivity with a range of up to 500 m. Integration with the UniFi Controller makes bridging two networks seamless. Comprised of two pre-paired endpoint devices, the UBB delivers a Point-to-Point (PtP) link – up to 1.7+ Gbps bi-directional –
using 802.11ad technology on the low-interference 60 GHz radio band. For backup, a 5 GHz radio using 802.11ac technology is available.
Wireless Link Redundancy 60 GHz is highly directional and any obstacle in the line of sight – even rain – can drop signal levels. To maintain connectivity, the UBB can fail over to the 5 GHz radio. The 5 GHz radio band propagates better and uses radio wave reflections and refractions more effectively, although it offers lower maximum throughput.
60 GHz Operating Frequency The 60 GHz band attenuates quickly due to atmospheric absorption. When a 60 GHz radio – such as the UBB – uses a highly directional antenna, inteference from other directions is also attenuated. The 60 GHz band thus offers extremely high transmission capacity as a wireless wire.
Pre-Paired Configuration Setup is quick and easy: the UBB radios are pre-paired out of the box so you can use the UniFi app for simultaneous adoption. The UniFi Controller software enables intuitive management of individual UniFi devices and site-wide deployments.
Sleek Industrial Design The UBB is designed with a compact form factor for discreet integration into any environment.
Convenient Alignment The UBB pivots on its ball joint 3-axis mount for easy aiming.
Mounting Versatility No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall-mounting. A wall mount kit, model NBE-WMK, is available as an optional accessory to enhance stability.
|Manufacturer Part Number:||UBB-US|
|Manufacturer Website Address:||http://www.ui.com|
|Product Name:||UniFi Building-to-Building Bridge|
|Product Type:||Wireless Bridge|
|Wireless LAN Standard:||IEEE 802.11ad|
|Frequency Band:||2.40 GHz, 5 GHz, 60 GHz|
|Wireless Transmission Speed:||1.70 Gbit/s|
|Ethernet Technology:||Gigabit Ethernet|
|Number of Network (RJ-45) Ports:||1|
|PoE PD Port:||Yes|
|Form Factor:||Wall Mountable, Pole-mountable|
|Height:||3.54" (90 mm)|
|Diameter:||5.51" (140 mm)|
|Weight (Approximate):||376 g|
One Year Limited Warranty with Ubiquiti