The PoE 8180 SIP Audio Alerter is a wall mount IP speaker for voice paging, emergency alerting and loud ringing applications. The speaker is a fully compliant 3rd party SIP endpoint. As a result, the 8180 IP speaker is compatible with most hosted / cloud and premise-based VoIP telephone systems.
- Public address (PA) IP speaker.
- Secure SIP using TLS and SRTP.
- Multicast scalable.
- Wideband HD voice for high intelligibility speech.
- Dynamic volume control responsive to ambient noise levels.
- Talkback capable speaker.
- Customize WAV files for emergency notification / alerting and telephone loud ringing.
- Configuration via user friendly web interface or auto-provisioning.
- PoE (IEEE 802.3af).
- Ideal for a school or college classroom, office, lunch room, kitchen, restaurant, etc.
Specifications
| Power | |
|---|
| POWER SOURCE |
PoE (IEEE 802.3af Class 0) 48V, 15.4W |
| MAX POWER (AT DEVICE) |
12.95W |
| IDLE POWER |
Nominal 2.5W |
| SIP | |
|---|
| SIP EXTENSIONS |
50 Page (Capable of hands-free talkback) |
| |
10 Emergency Alert |
| |
10 Ring |
| SIP SIGNALLING/TRANSPORT PROTOCOLS |
UDP, TCP, RTP |
| SECURITY |
TLS, SRTP, Mutual Authentication |
| AUDIO CODECS |
G.711 u-law, G.711 A-law, G.722 Wideband |
| Multicast | |
|---|
| RTP MULTICAST |
Send and Receive 50 Zones |
| AUDIO CODECS |
G.711 u-law, G.711 A-law, G.722 Wideband, Opus Fullband |
| Third-Party Compatibility | |
|---|
| |
RESTful API |
| |
Poly Group Page |
| |
Singlewire InformaCast (additional license required) |
| |
Syn-Apps Revolution |
| |
Microsoft Teams |
| Configuration & Provisioning | |
|---|
| CONFIGURATION |
Web interface or provisioning server |
| WEB INTERFACE |
HTTP, HTTPS |
| PROVISIONING |
TFTP, FTP, HTTP, HTTPS |
| |
DHCP Options 66, 150, 160 |
| |
Reboot via SIP ‘check-sync’ |
| ZTP |
Supported |
| SUPERVISION |
Compatible with Algo Device Management Platform (ADMP), Algo 8300 IP Controller, any third party SNMP monitoring software, and RTCP |
| Networking | |
|---|
| NETWORKING |
IPv4, IPv6, DHCP, VLAN, MDNS |
| LINK LAYER |
LLDP, CDP |
| SECURITY |
IEEE 802.1X |
| QOS |
DSCP |
| NAT |
STUN, TURN, CRLF Keep Alive, SIP Outbound |
| ADDRESS RESOLUTION |
DNS, SRV Record |
| REDUNDANCY |
Secondary and tertiary SIP server |
| TIME |
NTP Server (up to four) |
| Audio | |
|---|
| SPL |
106 dBA at 1m (120dBA with 1186 horn) |
| MICROPHONE |
Omnidirectional – talkback and ambient noise monitoring |
| AUDIO MEMORY & FORMAT |
1GByte audio storage for WAV or MP3 files |
| AUDIO CONTROLS |
Volume, AGC, Latency, LF Cut |
| ANTI-FEEDBACK DELAY |
Cache to memory and release |
| AUDIO DELAY |
Programmable 1-1000ms synchronization delay (in multicast receiver mode) |
| DRIVER |
3.0" (7.7cm) UV Stabilized |
| DRIVER RESPONSE |
150-13,000Hz (-10dB) |
| MAX AUDIO POWER |
8W |
| AUDIO OUTPUTS |
Speaker output 8Ohm 8W when internal speaker disabled Audio Output nominal 0dBm into 600Ohm load |
| Input/Output | |
|---|
| RELAY INPUT* |
Normally open or normally closed dry contact with supervision. Compatible with Algo 1202 Call Button, 1203 Call Switch, 1204 Volume Control, or EOL resistor termination |
| RELAY OUTPUT* |
Max 30V 50mA (normally open) |
| SPEAKER OUTPUT |
To external 8Ohm speaker. Note that if an external speaker is connected, the internal one is deactivated. |
| AUDIO OUTPUT |
Line output level available for optional connection to external amplifier. |
Note: The Relay Input and Relay Output features share the same pins on the terminal block, which must be configured as either an input or output. Thus, only one of these two functions can be used per device (not both).
| Relay Input Current Draw Detection Thresholds | Active | Idle | Tamper |
|---|
| NORMALLY OPEN |
>4mA |
<4mA |
N/A |
| NORMALLY OPEN WITH SUPERVISION |
>20mA |
4-20mA |
<4mA |
| NORMALLY CLOSED |
<4mA |
>4mA |
N/A |
| NORMALLY CLOSED WITH SUPERVISION |
4-20mA |
>20mA |
<4mA |
| NOMINAL 12V SOURCE, CURRENT LIMITED TO 40MA |
| Typical supervision resistor value = 1k Ohm |
| Environmental & Mechanical | |
|---|
| ENVIRONMENTAL |
0 to + 40 °C (32 to 104 °F); 10-95% RHnon-condensing. Dry indoor locations only. |
| DIMENSIONS (PRODUCT) |
7″ x 4″ x 2.6″ (17.8cm x 10.2cm x 6.5cm) |
| WEIGHT (PRODUCT) |
1.0lbs (0.5kg) |
| WEIGHT (SHIPPING) |
1.6lbs (0.7kg) |
| MOUNTING |
Wall mount snap bracket included |
