Fanvil GA10 FXS Gateway (GA10)

GA10 is an easy-to-use single FXS port ATA gateway, it has with HD voice, 2 SIP accounts, advanced VoIP functionality and auto provisioning etc functions. By migrate to IP voice with the easy-to-install ATA, enable users to take advantage of VoIP on analog phones. It provides convenient, stable and cost-effective communication solutions for individual, enterprise and operator users' IP voice deployment.

Fanvil GA10 SIP ATA Gateway

The Fanvil SIP ATA Gateway is a single FXS port device that supports 2 SIP Lines, HD voice, USB port for PSU connection, and 3-way conference call. It also features G.722, Opus. The Fanvil GA10 Gateway offers an effective and affordable communication solution for individuals and o enterprises looking to deploy VoIP.

Fanvil GA10 Gateway Features and Specifications:

• 2 SIP lines
• Support 3-way audio conference 
• G.722 and Opus audio codec 
• Compact and portable, easy to install
• 10/100Mbps Ethernet, single network port 
• 4 status indicator lights for Power/Network/SIP State/Call
• USB port or power adapter for power supply
• Support desktop and wall-mounted installation modes
• Comes with PSU by default

Generic
 2 SIP lines
 HD voice
 Desktop / wall-mounted
 Support USB port or power adapter for power supply

Phone Functions
 Caller ID display
 Direct IP Dialing
 Anonymous call (hide caller ID)
 Call hold / resume
 Call waiting
 Call forward (Always/Busy/No Answer)
 Call Transfer (Attended/Unattended)
 Do-Not-Disturb
 Voice message waiting indication (MWI)
 Blocked list / allowed list
 3-way conference
 Hot line

Audio
 Narrowband codec: G.711a/u, G.726, G.729A/B, iLBC
 Wideband codec: G.722, Opus
 Acoustic Echo Canceller (AEC) Voice Activity Detection (VAD) / Comfort Noise Generation (CNG) / Noise Reduction (NR) / Automatic Gain Control (AGC)
 Packet Loss Concealment (PLC)
 Dynamic adaptive jitter buffer  DTMF: In-band, Out-of-Band (RFC2833/ SIP INFO)
 Support the signal tone of different countries or regions FXS features
 Response detection  Busy tone detection  Incoming call detection  Polarity detection  Hang up detection  Disconnect Methods: Busy Tone, Polarity Reversal
 Signalling: Kewl Start, Loop Start

Network
 Physical: 10/100Mbps Ethernet
 IP Mode:IPv4/IPv6/IPv4&IPv6
 IP Configuration: Static IP / DHCP / PPPoE
 Firewall
 QoS

Protocols
 SIP2.0 over UDP/TCP/TLS
 RTP/RTCP/SRTP
 STUN
 DHCP
 CDP
 PPPoE
 SNTP
 FTP/TFTP
 HTTP/HTTPS
 TR-069

Deployment & Management
 Auto-provisioning via FTP/TFTP/HTTP/HTTPS/DHCP OPT66/SIPPNP/TR-069
 Voice menu for basic configuration
 Web management portal
 Web-based packet dump
 Configuration export / import
 Phonebook import/export
 Backup and recovery
 Firmware upgrade
 Syslog 

Physical Specifications
 Power adapter x1
 1.5M CAT.5E ethernet cable x1
 Reset key x1
 Status indicator light x4: power/network/SIP state/call
 FXS port x1: RJ11 x1
 Network port x1: RJ45 x1
 USB port x1: Micro USB x1 (Only power input is supported)
 DC port x1: Φ5.5x2.1x10mm
 DC power input: DC5V/1A
 Working temperature: 0~45℃
 Working humidity: 10~95%
 Installation: Desktop or Wall-mounted
 Color: black
 Device dimensions: 85x68x22.7 mm
 Gift box dimensions: 150x125x55 mm
 Outer CTN dimensions: 300x272x330 mm(20 PCS)