Description
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card. The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
- NEMA L5-30P input; 8 NEMA 5-15/20R & 1 L5-30R outlets
- 2 independently switchable output load banks
- USB, RS232 & EPO ports, Pre-installed WEBCARDLX Network Interface Card
- Expandable runtime, Hot-swap batteries, 96% efficiency, Sine wave output
- Interactive LCD provides UPS status information and advanced configuration options
- 120V nominal output during brownouts to 83V and overvoltages to 145V
- 3kVA / 3000VA / 2880W line interactive 2U rack/tower UPS; 0.96 power factor
Extra Information
Brand:
Tripp Lite by Eaton
Receptacle Detail:
1 x NEMA L5-30R,8 x NEMA 5-15/20R
Phase:
Single Phase
Product Series:
SmartPro
Form Factor:
Rack/Tower
Package Contents:
SMART3000RMXLN UPS System with Pre-installed SNMPWEBCARDPowerAlert Software CDUSB CableSerial CableEPO Cable4 Post Installation KitInstruction Manual
Backup/Run Time (Full Load):
3 Minute
Load Capacity:
3 kVA/2.88 kW
Manufacturer:
Tripp Lite by Eaton
Product Model:
SMART3000RMXLN
Backup/Run Time (Half Load):
10 Minute
Rack Height:
2U
Receptacle Type:
NEMA L5-30R,NEMA 5-15/20R
Environmentally Friendly:
Yes
Input Voltage:
120 V AC
Transfer Time:
5 ms
Limited Warranty:
3 Year
Typical Battery Recharge Time:
5 Hour
Waveform Type:
Pure Sine Wave
Plug/Connector Type:
NEMA L5-30P
Product Type:
Line-interactive UPS
Replaceable Battery:
Yes
Hot Swappable:
Yes
Output Voltage:
110 V AC,115 V AC,120 V AC
AVR:
Yes
Country of Origin:
China
DC System Voltage:
48 V DC
Software Included:
PowerAlert Software
Network Management:
SNMP Manageable
Serial Port:
Yes
Maximum Operating Temperature:
104°F (40°C)
Output Frequency:
60 Hz
Storage Temperature:
5°F (-15°C) - 122°F (50°C)
USB:
Yes
EMI/RFI Noise Filter:
Yes
Input Frequency:
60 Hz
Surge Energy Rating:
570 J
Alarm:
UPS StartUp,Power Failure,Low Battery,Overload,UPS Fault,Remote Shutdown
Status Indicators:
Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Re
Manufacturer Website Address:
https://tripplite.eaton.com/
Warranty Information
Manufacturer Warranty
